Rauch QUANTRON-A AXIS-M 20 Q User Manual

Operation QUANTRON-A 4
44
Minimum factor
In accordance with the entered flow factor value, the machine control unit auto-
matically sets the minimum factor to one of the following values:
 The minimum factor is 0.2 if the input value is smaller than 0.5.
 The minimum factor is reset to 0.4 as soon as you enter a value exceeding 0.5.
Displaying the flow factor with the M EMC function (AXIS only)
Enter a value for the flow factor in the Flow factor submenu as a standard. How-
ever, during spreading and when the M EMC function is enabled, the control unit
controls the left and the right metering slide separately. Both values are shown
on the operating screen.
When pressing the Start/Stop key, the display updates the flow factor display
with a slight delay. The display is updated at regular intervals.
Figure 4.11: The left and right flow factors are controlled separately (M EMC
function activated).
[1] Flow factor for the right metering slide opening
[2] Flow factor for the left metering slide opening
2
1

Rauch QUANTRON-A AXIS-M 20 Q Specifications

General

Brand	Rauch
Model	QUANTRON-A AXIS-M 20 Q
Category	Control Unit
Language	English