Operation QUANTRON-A 4
48
Recalculating the flow factor
8. Weigh the collected weight (taking into account the empty weight of the col-
lecting vessel).
9. Enter the collected quantity.
See chapter 4.13.2: Entering values with the cursor keys, page 84
.
10. Press the Enter key.
The new value is saved in the control unit.
The Flow factor calculation menu is displayed.
11. Define the flow factor.
For taking over the newly calculated flow factor, press the Enter key.
For confirming the previously savedflow factor, press the ESC key.
The flow factor is saved.
The Fertiliser settings menu is displayed.
n WARNING
Risk of injury due to rotating machine parts
Contact with rotating machine components (universal drive shaft,
hubs) may cause bruises, abrasions and crushing injuries. Body
parts or objects may be caught or drawn in.
Switch off the tractor motor.
Switch off the PTO and secure it against unauthorised acti-
vation.
NOTICE
The flow factor must be between 0.4 and 1.9.
To Next Page
Loading...