Operation QUANTRON-A
83
4
Overwriting characters:
A single character can be overwritten by another character.
1. Use the Function keys to move the cursor to the position of the character to
be deleted first in the input field.
2.
Use the
arrow keys
to select the character to be written in the character field.
3. Press the Enter key.
The character is overwritten.
4. To Confirm the entry, press the OK function key.
The text will be saved to the control unit.
The previous menu is displayed.
Deleting an input:
The complete entry can be deleted.
1. Press the C 100 % key.
The complete input has been deleted.
2. Enter new text, if necessary.
3. Press the OK function key.
NOTICE
Individual characters can only be deleted by replacing them with blank spaces
(underline at the end of the first 2 character lines).
To Next Page
Loading...
Need help?
General
