21
ADDING ICONS TO SHORTCUT LIBRARY
To add a widget to the Customizable Shortcut Bar:
1. Press Add Shortcut in the Customizable Shortcut Bar.
2. Select the desired icon.
3. To remove an icon in the Customizable Shortcut Bar, press and hold the desired
icon.
4. Press the X in the top-left corner of the icon when it appears.
MACHINE CONFIGURATION
IMPORTANT:Entering all measurements as accurately as possible will ensure fewer issues
with field operations. Verify all measurements before entering them into the
CRX and ensure you enter the numbers correctly.
Perform machine configuration when installing the CRX on a new machine. To
configure a machine:
1. On the settings screen, press the Machine button. The machine
Configuration window will open.
The weather sensor provides support for add on components that
measure temperature, humidity, etc. The information from the
weather station can be recorded along with other job information.
Allows the user to adjust On Line (OL) Sensitivity and the Line
Acquire speed, configure all SmarTrax settings and run SmarTrax
calibration.
If there is a software update available, it can be installed on this
page using either Slingshot Link or a USB drive. GPS and CRX
unlock status and System information can also be found on this
page.
Provides information on UT instances, identify UT’s or clear UT
object pools.
Icon Information
To Next Page
Loading...
Need help?
General
