49
4. Press the INFORMATION tab to view information on the number of
satellites visible, Elevation, GPS Quality, HDOP, Diff Age, Diff ID, Messages, and
Differential type. The image below shows an example of what a GPS satellite array
may look like above an implement. The blue dots are GPS satellites current being
used for corrections. The GPS satellites that are grayed out indicate satellites not
being used for correction.
5. After viewing and editing the GPS information, Press Accept .
REMOTE SUPPORT
Remote support allows a Raven service specialist to remotely control the CRX. If
remote support is needed to troubleshoot or access information on the CRX remote
support will have to be enabled. Remote support on the CRX can only be completed
via Slingshot. To enable remote support:
1. Press Remote Support on the CRX Settings screen. The Remote Support
page will open.
2. Select the Enable Remote Support checkbox.
3. Provide the support code displayed in the lower-left corner of the CRX to the
service specialist. Once remote support is connected, the name of the Remote
Viewer will be visible in the list.
4. Accept the waiver to enable remote support.
5. After Enabling Remote Support, press Accept .
To Next Page
Loading...
Need help?
General
