4
Manual No. 016-5034-004 35
Wheel Angle Sensor Installation
FIGURE 21. Axle Mounting Bracket
15. Locate the 2WD axle mounting bracket (P/N 107-0172-044).
FIGURE 22. Axle Mounting Bracket Installed
16. Align the top hole in the axle mounting bracket with the first axle bolt hole.
17. Align the bottom hole in the mounting bracket with the first hole in the bottom row.
18. Secure the axle mounting bracket to the axle using two M20 x 2.5 x 90 mm hex bolts (P/N 311-0070-034),
two 0.812” ID x 1.469” OD x 0.134” thick washers (P/N 313-2300-023), and two M20 x 2.5 nylon insert lock
nuts (P/N 312-4000-212).
To Next Page
Loading...
Need help?
General
