Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
8 Raycus Laser Control System Instructions
Software download link: http://www.raycuslaser.com/list/56.html
8.1 Main Interface of the Software
The software main interface is shown as Figure 30:
Figure 30 Raycus Laser Control Softwaredisplaysmaininterface
8.2 Multi-laser Control
Click “Select Laser” on the main interface, and the laser selection list will be popped up. Each laser
has a different IP address. Select the corresponding IP address to select the corresponding laser. After
selecting the laser to be operated, click “Close” to close the laser selection interface.Multi-laser control is
as Figure 31:
To Next Page
Loading...
Need help?
General
