Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
WARNING: The disconnection of the product grounding will cause the
product shell to become electrified, which may result in personal injury
to the operator.
b) Ensure that the AC voltage is supplied normally.
CAUTION: Wrong wiring mode or power supply voltage will cause an
irrecoverable damage to the laser device.
1.5 Other Safety Guidelines
a) DO NOT watch the fiber delivery connector of the product directly by anytime when the product
is powered on.
b) DO NOT use the product in a dark or dim place.
c) If the product is used in a manner not specified in this document, the resulted impairment to the
laser will not be covered by the warranty.
d) There are no user serviceable parts, equipment, or assemblies inside the product. All service and
maintenance shall be performed and conducted by the Raycus engineer or authorized personnel.
In order to prevent electric shock, DO NOT break the seal or remove the shell. Failure to comply
with this instruction and the resulted impairment to the laser will not be covered by the warranty.
To Next Page
Loading...
Need help?
General
