Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
to lock and unlock the machine and can also be used as an authorization code generator.
The locking time setting can set the effective using time of laser. For example, the lockingtime: May
21, 2020, indicating that the laser is locked until 0:00 on May 21, 2020, 0/0/2000 means the laser is
permanently unlocked.
The terminal password is set for the laser locking party. The terminal code can only be set once, and
no modification is allowed after its set. The terminal password is 8-byte, e.g., 0123456789ABCDEF, no
other characters are allowed.
The terminal password is set for the laser locking party, and the terminal code can only be set once,
and it is not allowed to be modified after setting once. The terminal password is 8-byte hexadecimal, for
example: 0123456789ABCDEF, other characters are not allowed.
Figure 58 Generate authorizationcode
Click and generate authorization code, and the software will automatically calculate the authorization
code. Then click to set the authorization time to realize the time limited locking of the laser.
Figure 59 Lock set successfully
To Next Page
Loading...
Need help?
General
