Service Manual Rayjet
Laser beam alignment
Beam alignment
07/09/2010 Trotec Produktions- und Vertriebs GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support 13 / 53
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto: rayjet@troteclaser.com www.rayjetlaser.com
Beam path of the Rayjet:
Illustration is with removed service and maintenance panel.
What you have to do
1. Put on your laser protection glasses.
2. Remove the three screws shown below on the right inside of the working area and disassemble
the panel.
Mirror 3
Mirror 2
Mirror 1
To Next Page
Loading...
