6.Ensurethattheunitfitsintotheremovedareaandthenfilearoundanyroughedgesuntilsmooth.
7.
Drill4holesasindicatedonthetemplatetoacceptthefixings.
8.Placethegasketontotherearofthedisplayandpressfirmlyontotheflange.
9.Connectthepower,dataandothercables.
10.Slidetheunitintoplaceandsecureusingthefixingsprovided.
11.Refitthescrewcovers.
Note:
Thesuppliedgasket
providesasealbetweentheunitandasuitablyflatandstiffmountingsurface
orbinnacle.Ifthemountingsurfaceorbinnacleisnotentirelyflatandstifforhasaroughsurface
finish,inadditiontousingthemountinggasketitmayalsobenecessarytousemarine-grade
sealant.
Installation33
To Next Page
Loading...
