16 SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
2.5 Adapting the installation
Note:
Refer to
Accessories
on
page 5
for details of parts available to adapt your installation.
Pushrod extension
Referring to the following illustration, if dimension C is greater than 620 mm (24.5”),
use a pushrod extension.
To use a pushrod extension:
1. Select a pushrod extension with a length L nearest to C - 620 mm (24.5”).
2. Unscrew the pushrod end cap.
3. Screw on the pushrod extension.
4. Screw the pushrod end cap onto the pushrod extension.
Pushrod mounting
Cantilever socket
Use the cantilever socket if you need to attach the tiller drive to a vertical face such as
the cockpit sidewall.
L
C
D10652-1
L
F
D
1
0
6
5
3
-1
To Next Page
Loading...
