52 SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
Seatrial calibration lock
This screen controls the access to Seatrial calibration.
Vessel type
Selecting the correct vessel type, enables the SPX-5 Tiller system to set appropriate
values for other calibration settings, to give optimum performance. Refer to the table
on
page 58
for default values.
Options
CAL LOCK OFF
Calibration lock off – Seatrial calibration can be accessed (default)
CAL LOCK ON
Calibration lock on – Seatrial calibration cannot be accessed
Accessing
Dealer Calibration
Dealer Calibration
D10603-1
To exit & save changes
2 seconds
2 seconds
(saves changes)
+
or
or
To adjust values
To Next Page
Loading...
