EasyManua.ls Logo

Raymarine SmartPilot X5 - Autotack Angle; Gybe Inhibit; Wind Selection; Windtrim

Raymarine SmartPilot X5
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56 SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
AutoTack angle
The AutoTack angle is not adjustable. The apparent wind angle when AutoTack is
initiated, is mirrored the other side of the wind, on the opposite tack.
Gybe inhibit
With gybe inhibit on:
You will be able to perform an AutoTack into the wind.
The SPX-5 Tiller system will prevent the boat from performing an AutoTack away
from the wind.
With gybe inhibit off, you can perform an AutoTack into or away from the wind.
.
Wind selection
Note:
Only available if appropriate wind data is available.
This screen determines whether the boat steers to apparent or true wind in Wind Vane
mode.
.
WindTrim
WindTrim controls how quickly the SPX-5 Tiller system responds to changes in the
wind direction. Higher wind trim settings will result in a system that is more responsive
to wind changes.
.
PowerSteer
If you have a joystick connected to your SPX-5 Tiller system, use this screen to select
the required joystick mode of operation. For detailed operating information, refer to
the guide supplied with the joystick.
Screen Text Options
GYBE STOP
On (Default)
OFF
Options
WIND APP (Default)
SPX-5 Tiller system steers to apparent wind angle
WIND TRUE SPX-5 Tiller system steers to true wind angle
Screen Text Options
WIND TRIM
Range = 1 to 9
Lower values (1 to 3) = SPX-5 Tiller system responds to longer
term wind changes (less system activity)
Typical values = 4 to 6
Higher values (7 to 9) = SPX-5 Tiller system responds to
shorter term wind changes (more system activity)

Table of Contents

Other manuals for Raymarine SmartPilot X5

Related product manuals