EasyManua.ls Logo

Raymarine SmartPilot X5 - Appendix 2:Spx-5 Tiller System Specifications; Course Computer

Raymarine SmartPilot X5
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Appendix 2: SPX-5 Tiller system specifications
Course Computer
Nominal supply voltage 12 V dc
(10 A fuse protection at distribution panel)
(10 A thermal circuit breaker protection at distribution panel)
Operating voltage range 10 V to 16 V dc
Power consumption (standby) 200 mA
Gyro Built in
Environmental conditions:
operating temperature
non-operating temperature
relative humidity limit
water protection
-10°C to 55°C (14°F to 131°F)
-20°C to 70°C (-4°F to 158°F)
80%
Drip resistant when mounted vertically
Storage conditions when
packed:
temperature range
relative humidity limit
-5°C to 50°C (23°F to 122°F)
75%
Dimensions:
Width: 240 mm (9
7
/
16
), Height: 170 mm (6
11
/
16
“), Depth: 55 mm (2
3
/
16
“)
Weight 600 g (1 lb 5.2oz)
Inputs
Fluxgate Compass, NMEA 0183 v3.01, SeaTalk (x2), SeaTalk
ng
,
power
Outputs NMEA 0183 v3.01, SeaTalk (x2), drive motor, drive clutch
Raymarine drive compatibility: ST4000 Tiller Drive (standard and GP)
(as supplied with product)
ST4000 Wheel Drive
Drive motor output: Continuous 5 A at nominal 12 V
SeaTalk output 2A at 12 V (fuse protected at 2A)
NMEA 0183 v3.01 inputs/out-
puts
See
Appendix 1: NMEA 0183 sentences
NMEA fast heading output HDG
5 Hz 0.1° resolution
Fuses Standard automotive blade fuses to protect:
Power Terminals - 15 A
SeaTalk Terminals - 2 A
EMC compliance: Europe 2004/108/EC (EMC)
Australia and New Zealand: C-Tick, Compliance Level 2

Table of Contents

Other manuals for Raymarine SmartPilot X5

Related product manuals