Record 6100 Series User Manual

Not applicable unless the operator
has been configured with the
optional electric brake. If unit does
not have the brake, use of any
setting other than “0 Without” may
cause improper door operation.
5
If the operator has the optional elec-
tric brake this setting will cause the
brake to engage when the door is
fully closed. Note the brake is not
considered as an equal alternative
to a security lock.
If the operator has the optional elec-
tric brake this setting will cause the
brake to engage when the door is in
the full open position. This will hold
the door in the open position during
excessive wind surges.
If the operator has the optional elec-
tric brake this setting will cause the
brake to engage when the door is in
both the full open and full closed
positions.
SERVICE STG
Configure System >
Learning System >
Parameter >
Maintenance >
Functions >
Operation Mode >
PARAMETER
Driving cycle >
Time delay open >
Drive >
Entrance system >
Manual control >
Control panel >
DRIVE
Opening angle 40
Obstruction close 20
Obstruction open 20
Brake 0
Types of arms 0
Invers 0
BRAKE
0 Without
1 Closing position
2 Opening position
3 Open./close pos.
SERVICE STG
Configure System >
Learning System >
Parameter >
Maintenance >
Functions >
Operation Mode >
PARAMETER
Driving cycle >
Time delay open >
Drive >
Entrance system >
Manual control >
Control panel >
DRIVE
Opening angle 40
Obstruction close 20
Obstruction open 20
Brake 0
Types of arms 0
Invers 0
BRAKE
0 Without
1 Closing position
2 Opening position
3 Open./close pos.
SERVICE STG
Configure System >
Learning System >
Parameter >
Maintenance >
Functions >
Operation Mode >
PARAMETER
Driving cycle >
Time delay open >
Drive >
Entrance system >
Manual control >
Control panel >
DRIVE
Opening angle 40
Obstruction close 20
Obstruction open 20
Brake 0
Types of arms 0
Invers 0
BRAKE
0 Without
1 Closing position
2 Opening position
3 Open./close pos.
SERVICE STG
Configure System >
Learning System >
Parameter >
Maintenance >
Functions >
Operation Mode >
PARAMETER
Driving cycle >
Time delay open >
Drive >
Entrance system >
Manual control >
Control panel >
DRIVE
Opening angle 40
Obstruction close 20
Obstruction open 20
Brake 0
Types of arms 0
Invers 0
BRAKE
0 Without
1 Closing position
2 Opening position
3 Open./close pos.

Record 6100 Series Specifications

General

Brand	Record
Model	6100 Series
Category	Control Unit
Language	English