COPYRIGHT © 2012 RED Digital Cinema 955-0003_v3.2, Rev-A1
44
NOTE: Once powered up, if the Power Status LED illuminates Red, it indicates low remaining
battery capacity and a battery exchange or switch over to external DC power is recommended.
POWER DOWN
The camera can be powered down in two ways:
1. Using REDMOTE or Side Handle Menu controls, or via Touch Screen LCD icons. Refer to
SECONDARY MENUS > POWER.
2. Depress and continue to hold the Power / Record button in its fully depressed position until the
INITIATING CAMERA SHUTDOWN shows on the display.
After Power Down, the Power Status LED will illuminate Red, if an appropriate power source is available.
To Next Page
Loading...
