Reer Mosaic Series - Graphic interface

Mosaic fieldbus modules
8540801 • 01/02/2017 • Rev.15 18
It is important to note that the BUS CONFIGURATOR behaves differently, depending on whether
communication is with an MBx module or an MBU module:
 MBx MODULE: THE SOFTWARE ONLY ALLOWS DATA TRANSMITTED VIA BUS TO BE DISPLAYED.
 MBU MODULE: THE SOFTWARE ALLOWS TWO-WAY DATA TRANSMISSION MBUPC
(in this case the programmer can set the Fieldbus input directly via computer).
The data sets to be transmitted, any modular I/Os, the Fieldbus input, the address of the module in the
fieldbus network and, where applicable, the baud rate are all settable parameters.
The address field range depends on the type of fieldbus that is installed.
Graphic interface