Renault EASY CONNECT - Wireless Charger

wireless charger
induction recharging.............................
(up to the end of the DU)
wireless charger ........................................
(up to the end of the DU)
4.19
ENG_UD69070_5
Chargeur sans fil (XNX - Renault)
Wireless charger
WIRELESS CHARGER (1/2)
Charging procedure
Position your telephone in the 2 induc-
tion area 1.
Phone charging 2 is interrupted in the
following cases:
– an object is detected in the induction
area 1;
– the induction area 1 is overheating.
Once the temperature has dropped,
your telephone’s charging proce-
dure 2 will soon restart.
2
1
Induction
charging area
Introduction
Use the induction charging zone 1 to
charge a telephone without connecting
it to a charging cable.
The dedicated location of this charg-
ing zone is identified by its associated
symbol and may vary depending on
your vehicle.
Note:
– for more information on compatible
telephones, contact an authorised
dealer or visit https://easyconnect.
renault.com.
– it is preferable to remove the protec-
tive bodyshell or case from your tel-
ephone before charging to obtain op-
timal charging.
Charging progress
The multimedia system informs you
of the charging status 3 for your tele-
phone2:
– charging complete 4;
– charging in progress 5;
– object detected in the charging area/
object overheating/charging proce-
dure interrupted 6.
Note: the multimedia system will signal
if your telephone 2 charging procedure
is interrupted.
4
5
6
3