GB.68
PARKING DISTANCE CONTROL, REVERSING CAMERA (2/2)
Rear camera view settings
From the “Settings” menu, press “Park
Assist” then “Rear camera view set-
tings” to activate/deactivate the revers-
ing camera, the mobile clearance and
fixed gauges.
Confirm your choice by selecting
“Done”.
To reset the camera settings, from the
“Rear camera view settings” menu,
press “+” then select “Reset factory set-
tings”.
For further information on the reversing
camera, please see your owner’s hand-
book.
Image settings
From the “Vehicle” menu, go to
“Settings”, press “Image settings”, then
adjust the following settings:
– brightness;
– saturation;
– contrast.
Confirm your choice by selecting “Done
”.
To reset the video settings, from the
“Image settings” menu, press “+” then
select “Reset factory settings”.
To Next Page
Loading...
