Renishaw OMP40-2 - Accessories and Publications

OMP40-2 installation guide
9.2
Parts list
Item Part number Description
Weak link A-2085-0068 Weak link (part no. M-2085-0009 ×2) and 5mm A/F spanner.
Mounting bracket A-2033-0830 Mounting bracket with fixing screws, washers and nuts.
OMP40M module A-5626-2001 OMP40M module with batteries, tool kit and quick-start guide
(set to optical on / optical off) – modulated transmission,
PROBE 1 start.
LPE1 A-2063-7001 LPE1 extension bar – 50 mm long.
LPE2 A-2063-7002 LPE2 extension bar – 100 mm long.
LPE3 A-2063-7003 LPE3 extension bar – 150 mm long.
MA4 A-2063-7600 MA4 90° adaptor assembly.
LP2 A-2063-6098 LP2 probe complete with two C spanners and TK1 tool kit.
Publications. These can be downloaded from our website at www.renishaw.com.
OMI-2 H-5191-8504 Installation guide: for set-up of the OMI-2.
OMI-2T H-5439-8510 Installation guide: for set-up of the OMI-2T.
OSI/OSI-D with
OMM-2
H-5492-8504 Installation guide: for the set-up of the OSI/OSI-D interface
with OMM-2.
OSI/OSI-D with
OMM-2C
H-5991-8504 Installation guide: for set-up of the OSI/OSI-D interface with
OMM-2C.
Styli H-1000-3200 Technical specication: Styli and accessories or visit our
Online store at www.renishaw.com/shop.
Probe software H-2000-2298 Data sheet: Probe software for machine tools – programs and
features.
Taper shanks H-2000-2011 Data sheet: Taper shanks for machine tool probes.