9.1
Item Part number Description
OMP40-2 A-4071-2001 OMP40-2 probe with batteries, tools and product card (set to
optical on / optical off) – modulated transmission, PROBE 1
start.
OMP40-2 A-4071-2002 OMP40-2 probe with batteries, tools and product card (set
to optical on / time off 134 sec) – modulated transmission,
PROBE 1 start.
OMP40-2LS A-4071-3001 OMP40-2LS probe with batteries, tools and product card (set
to optical on / optical off) – modulated transmission, PROBE 1
start.
Batteries P-BT03-0007 ½AA battery – lithium-thionyl chloride (pack of two).
Stylus A-5000-3709 PS3-1C ceramic stylus 50 mm long with Ø6 mm ball.
Styli tool M-5000-3707 Tool for tightening/releasing styli.
Tools A-4071-0060 Probe tool kit comprising Ø1.98 mm stylus tool,
2.00 mm A/F hexagon key and shank grub screw (× 6).
Battery cassette A-4071-1166 OMP40-2 battery cassette assembly.
Battery cassette A-5625-1166 OLP40 metal battery cassette assembly.
Battery gasket A-4038-0301 OMP40-2 battery cap gasket kit.
Shank adaptor
assembly
A-4071-0031 Shank adaptor assembly for mounting to OMP60, RMP60,
MP700 type shanks.
OMI-2 A-5191-0049 OMI-2 complete with cable 8 m (26.25 ft) long.
OMI-2 A-5191-0050 OMI-2 complete with cable 15 m (49 ft) long.
OMI-2T A-5439-0049 OMI-2T complete with cable 8 m (26.25 ft) long.
OMI-2T A-5439-0050 OMI-2T complete with cable 15 m (49 ft) long.
OMM-2 A-5492-0049 OMM-2 with cable 8 m (26.25 ft), tool kit and product card.
OMM-2 A-5492-0050 OMM-2 with cable 15 m (49 ft) tool kit and product card.
OSI interface A-5492-2000 OSI (multiple probe mode) with DIN rail mounting, terminal
block and product card.
OSI interface A-5492-2010 OSI (single probe mode) with DIN rail mounting, terminal
block and product card.
OSI-D interface A-5492-3000 OSI-D (multiple probe mode) with DIN rail mounting, terminal
block and product card.
OSI-D interface A-5492-3010 OSI-D (single probe mode) with DIN rail mounting, terminal
block and product card.
Parts list
see Section 6,“Parts list”
To Next Page
Loading...
