Resol EM User Manual

24
en
Î Enter the expert user code 0262 on the controller.
Î Register the extension module with the controller (In-/Outputs menu).
Î Select module 1.
Î Select heating circuit 2.
Î Select the relays.
If at least 1 relay is free on the controller, it will be  rst of all assigned to the
second heating circuit. The relays for HC2 have to be completely assigned to the
extension module.
ACTUAL state TARGET state
!
Î Select mixer closed and M1-R3.

Resol EM Specifications

General

Brand	Resol
Model	EM
Category	Control Unit
Language	English