Page 24 of 80
© Retrotec 2022
Turn [@ Pressure] on
[@ Pressure] is not available when Pressure is the Result on Channel B
[@ Pressure] is not available when the gauge is not actively controlling a fan
If [Set Pressure] function is used:
• Tapping [@ Pressure] so that it “is On” extrapolates the [Channel B] Result to the [Set Pressure]
target entered, using the “n” value specified in the second “Settings” screen.
• Tapping a [Jog] key so that target pressure changes causes the “@ Pressure” label to change as
well.
To Next Page
Loading...
Need help?
General
