46: User parameter set selection
47: Pulse input mode activation
48: Motor overheating error N.O. contact input
49: Motor overheating error N.C. contact input
50: Motor overheating warning N.O. contact input
51: Motor overheating warning N.C. contact input
Setting range of E1.15:
0: 2-wire forward / stop, reverse / stop
1: 2-wire forward / reverse, run / stop
2: 3-wire control mode 1
3: 3-wire control mode 2
4: 1-wire control
Setting range of E1.68:
0: AI1: curve1, AI2: curve1, pulse input: curve1
1: AI1: curve2, AI2: curve1, pulse input: curve1
2: AI1: curve1, AI2: curve2, pulse input: curve1
3: AI1: curve2, AI2: curve2, pulse input: curve1
4: AI1: curve1, AI2: curve1, pulse input: curve2
5: AI1: curve2, AI2: curve1, pulse input: curve2
6: AI1: curve1, AI2: curve2, pulse input: curve2
7: AI1: curve2, AI2: curve2, pulse input: curve2
Bosch Rexroth AG
Start-up
EFC 3610 / EFC 5610
54/87
DOK-RCON03-EFC-X610***-QU11-EN-P
To Next Page
Loading...
Need help?
General
