ever, operation under unfavorable conditions (e.g. increased ambient temper‐
ature) can lead to limitations in availability.
Risk of burns by hot surfaces with tempera‐
tures of more than 60 °C!
After switching the devices off, wait 15 minutes to allow them to cool down
before touching them. Do not work at hot surfaces.
In regular intervals (at the latest, after one year is over), check the heat sink
of the electronic system of the drive for accumulated dirt (e.g. dust deposits).
Remove accumulated dirt.
Bosch Rexroth AG DOK-INDRV*-KMS01******-IT01-EN-P
Rexroth IndraDrive Mi Distributed Drive Controller KMS01
46/67
Instructions for Use
To Next Page
Loading...
