Richard Wolf 2271 - Replacing Parts; Device Fuses

34
GA--A 181
8.5 Replacing parts
8.5.1 Device fuses
CAUTION!
The specification of the fuses in the device must correspond with
the fuse ratings on the identification plate.
Use only the fuses specified in the spare parts list.
L Device power connector with fuse holder
2
2
1
Z Switch off the device and disconnect the power cable from both the
wall socket and the device connector.
Z Use a screwdriver to remove the fuse holder (1).
Z Then remove the fuses (2) from the fuse holder (1) and replace.
Z Reinsert the fuse holder and push until it snaps into place.
8.5.2 Disposal of the product, packing material and accessories
For the disposal make sure you adhere to the regulations and laws valid
in your country.
' For further information please contact the manufacturer.