NetWare Configuration
68
5
D In the [Print Queue volume] box, click [Browse].
E In the [Available objects] box, click the volume in which the print queue is
created, and then click [OK].
F After checking the settings, click [Create].
L
LL
L
Create a printer as follows:
NetWare 3.x
A From the [Available Options] menu, select [Print Server Information] , and then
press the {
{{
{ENTER}
}}
} key.
B To create a new print server, press the {
{{
{INSERT}
}}
} key, and then type a
print server name.
If you use a currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. ( Step
H
).
C From the [Print Server Information] menu, select [Print Server Configuration].
D From the [Print Server Configuration] menu, select [Printer Configuration].
E Select the printer which is indicated as “Not Installed”.
F If you want to change the name of the printer, type a new name.
A name “Printer x” is assigned to the printer. “x” stands for the number of
the selected printer.
G For type, select [Remote Other/Unknown].
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H Press the {
{{
{ESC}
}}
} key, and then click [Yes] in the confirmation dialog box.
I Press the {
{{
{ESC}
}}
} key to return to the [Print Server Configuration] menu.
NetWare 4.1
A Select the container object the printer is located in, and then click [Create]
on the [Object] menu.
B In the [Class of new object] box, click “Printer”, and then click [OK]. When
you are using NetWare 5/5.1, click “Printer (Non NDPS)”.
C In the [Printer name] box, type the name of the printer.
D Select the [Define additional properties] check box, and then click [Create].
To Next Page
Loading...
