Delivering Stored Scan Data by the Network Delivery Scanner
60
5
D Enter part of the destination
name.
Note
❒ Enter the first character or
characters of the destination
name.
E Press [OK].
A list of destination names
found is displayed.
F Select a destination.
G Press [Exit].
H Press [OK].
The destination name is dis-
played in the destination field at
the top of the screen.
Manual input of a destination
Note
❒ When using ScanRouter V2 Pro-
fessional, it is possible to enter
the destination e-mail address
directly.
A Press [Manual Input].
The soft keyboard is displayed
to enter a destination.
B Enter the destination with the
soft keyboard.
Note
❒ Enter the e-mail address of
the destination when send-
ing via the delivery server.
❒ It is possible to use alphabets,
numbers and periods. The
symbols ()\,;:” cannot be
used.
For more information to enter
an e-mail address, see the Gen-
eral Settings Guide.
C Press [OK].
The name of the destination ap-
pears in the destination display
area on the upper side of the
screen.
Note
❒ Press [U
UU
UPrev.] or [T
TT
TNext] to se-
lect the destination.
❒ Pressing the {
{{
{Check Modes}
}}
}
key lets you verify the select-
ed destinations.
D To enter more than one desti-
nation, repeat steps A
AA
A to C
CC
C.
To Next Page
Loading...
