Ricoh Aficio 1060 - Page 733

Delivery Procedure
61
5
Checking selected destinations
A Use the destination field at the
top of the screen to check
which destinations are select-
ed.
Note
❒ When multiple destinations
are selected, the selected des-
tinations are displayed in or-
der they were selected by
pressing [U
UU
UPrev.] or [T
TT
TNext].
❒ Pressing the {
{{
{Check Modes}
}}
}
key on the control panel lets
you verify the list of selected
destination(s).
H
HH
H
Specify the sender (scan data de-
livery source).
Note
❒ When a sender has been speci-
fied, this information is added
to the scan data file. Select a
sender from the senders pro-
grammed in the delivery server.
Three methods are available for se-
lecting a sender: select the sender
from the list, enter the 5-digit short
ID number of the sender with the
number keys, and search for the
sender and select it.
When selecting a sender from the
list
A Press [Attach Sender’s Name].
A list of senders registered in
the delivery server is displayed.
B Select the sender.
The selected sender and its
short ID number are displayed.
Note
❒ When using ScanRouter V2
Professional, [Return Receipt]
appears when a sender is se-
lected.
To verify receipt, press [Return
Receipt].
C Press [OK].
The sender is displayed above
[Attach Sender’s Name].
Using a short ID number to select
a sender's name
A Press [Attach Sender’s Name]
A list of senders registered in
the delivery server is displayed.