Ricoh Aficio 1515 - Selecting Dial;Push Phone

Key Operator Setting
92
7
E Enter an ID using the number
keys, and then press the {OK} or
{#} key.
Note
 If you make a mistake, press the
{Clear/Stop} key before pressing
the {OK} key, and then try
again.
To cancel programming an ID,
press the {Cancel} key. The display
returns to that of step
D
.
F Press the {User Tools/Counter} key.
The standby display appears.
Selecting Dial/Push Phone
Use this function to select a line type.
Dial and Push lines are available for
selection.
Note
 This function is not available in
some areas.
A Press the {User Tools/Counter} key.
B Select [Fax Features] using {U} or
{T}, and then press the {OK} key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Select Dial/Push Phone] us-
ing {U} or {T}, and then press the
{OK} key.
E Select [Push Phone] or [Dial Phone
(10PPS)] using {U} or {T}, and
then press the {OK} key.
The display returns to that of step
D
.
Reference
p.102 “Selecting the Line Type”
F Press the {User Tools/Counter} key.
The standby display appears.
***
FAX
730
.t
if***
ABZ
118
S.eps
FAX
659
.t
if
FAX
660
.t
if
FAX
706
.t
if
***
FAX
731
.t
if***