Ricoh Aficio 1515 - G3 Analog Line

Using Key Operator Settings
93
7
G3 Analog Line
You need to make the following set-
tings for the G3 Analog Line before
you connect the machine to a stand-
ard G3 analog line.
• When your machine is connected
through a PABX, set to Extension.
If it is connected directly to the tel-
ephone network, set to Outside.
• Outside Access Number
Use this setting if your machine is
connected to a PABX that requires
you to dial a certain number such
as "0" followed by a pause to con-
nect to the outside line. By pro-
gramming "0" as the PSTN Access
Number, a pause will be inserted
automatically after the "0" when
dialing.
Important
 The set Outside Access Number is
not used for the dialing using the
{On Hook} key or an external tele-
phone.
A Press the {User Tools/Counter} key.
B Select [Fax Features] using {U} or
{T}, and then press the {OK} key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [G3 Analog Line] using {U}
or {T}, and then press the {OK}
key.
E Select the item you want to pro-
gram.
Extension/Outside
A Select [Extension/Outside] using
{U} or {T}, and then press the
{OK} key.
ABZ
118
S.eps
FAX
659
.t
if
FAX
660
.t
if
FAX
706
.t
if
***
FAX
732
.t
if***