Ricoh Aficio 1515 - Specifying Options

Using Fax with Computers
52
5
Specifying options
You can specify the following op-
tions:
For details, see Help.
• Sending at Specific Time
•User Code
•User ID
•Print Fax Header
A Click [Option...].
B Specify options you want to use.
 To send the fax document at a spe-
cific time:
Select the [Sending at Specific
Time] check box, and then speci-
fy a transmission time.
 To send with a user code:
Enter a user code into the [User
Code] field.
 To distinguish fax documents for
each user:
Enter a user ID into the [User ID:]
field. Use this option when
checking the job history using
SmartDeviceMonitor for Client.
 To have the header printed on the
fax document:
Select the [Print Fax Header ]
check box.
Note
 The user code you specified for
this machine must be the same
as the one entered in this ma-
chine. See General Settings Guide.
C Click [OK].
-Transmission result notification
After you have sent faxes, this func-
tion informs you whether the fax was
successfully transmitted to its desti-
nation or not.
When you use this machine just as a
printer, this function also informs you
whether data was successfully trans-
mitted to this machine or not.
Note
 You cannot receive notification
when using SmartDeviceMonitor
for Client version 5.0 or earlier.
 Transmission results are informed
only when connected with a net-
work using SmartDeviceMonitor
for Client.
-Managing transmission using
LAN-Fax Driver
From “SmartDeviceMonitor for Ad-
min”, “SmartDeviceMonitor for Cli-
ent”, or a Web browser, you can
manage transmissions using LAN-
Fax Driver. You can view the follow-
ing information on transmitted files
using LAN-Fax Driver.
 SmartDeviceMonitor for Client/Admin
•User ID
• Status
•Pages
•Started At
• File No.