3
1. Transmission Mode
Sending at a Specific Time (Send Later)
Using this function, you can instruct
the machine to delay transmission of
your fax message until a specified lat-
er time. This allows you to take ad-
vantage of off-peak telephone
charges without having to be by the
machine at the time.
If you have a non-urgent fax, select
Send Later when you scan it. Faxes
will be queued in memory and sent
during Economy Transmission Time.
Important
After the machine has been
switched off for about one hour, all
fax messages stored in memory are
lost. If messages are lost for this
reason, a Power Failure Report is
automatically printed when the
main power switch is turned on.
Use this report to identify lost mes-
sages.
Limitation
This function is unavailable with
Immediate Transmission. Use
Memory Transmission.
Note
You can specify a time within the
next 24 hour period.
If the current time shown is not
correct, change it. See “Timer Set-
tings”, General Settings Guide.
A Place the original, and then select
the scan settings you require.
Reference
p.13 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.25 “Scan Settings”, Facsimile
Reference <Basic Features>
B Press [TX Mode].
C Select [Send Later] using {U} or
{T}, and then press the {OK} key.
D Select [Send at specified time] using
{U} or {T}, and then press the
{OK} key.
N
x
e
.eps
FAX
.t
FAX
.t
FAX
.t
To Next Page
Loading...
Need help?
General
