Key Operator Setting
86
7
Reference
p.91 “Programming a Memory
Lock ID”
Limitation
If you program the same sender
in Memory Lock and Forward-
ing, Forwarding is disabled.
Programming/ Changing Special
Senders
A Press the {User Tools/Counter} key.
B Select [Fax Features] using {U} or
{T}, and then press the {OK} key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Program Special Sender] us-
ing {U} or {T}, and then press the
{OK} key.
E Select [Program/Change] using {U}
or {T}, and then press the {OK}
key.
F Select the destination to program
or change using {U} or {T}, and
then press the {OK} key.
When programming a new Special
Sender, select [* Not programmed]
using {U} or {T}, and then press
the {OK} key.
G Enter a destination name and
then press the {OK} key.
Enter a destination name using
Own Name or Own Fax Number.
Reference
“Entering Text”, General Set-
tings Guide
H Select [Full Agreement] or [Partial
Agreement] using {U} or {T}, and
then press the {OK} key.
ABZ
S.eps
FAX
.t
FAX
.t
FAX
.t
FAX
.t
FAX
.t
FAX
.t
FAX
.t
To Next Page
Loading...
