Key Operator Setting
88
7
D Press the {OK} key.
The display returns to that of
Step
I
.
Note
After you perform step
J
, set
"Forwarding" of “Reception
Settings” to "On". See p.67
“Reception Settings”.
Memory Lock
A Select [Memory Lock] using {U}
or {T}, and then press the {OK}
key.
B Select [On] or [Off], using {U} or
{T}, and then press the {OK}
key.
The display returns to that of
Step
I
.
Note
Selecting [Same as Basic Set-
tings] will result in the same
setting made for "Program
Memory Lock ID" under
"Key Operator Tools". See
p.75 “Memory Lock”.
J Press [Exit].
A Special Sender has been pro-
grammed.
Note
To program another sender, re-
peat the procedure from step
E
.
K Press the {User Tools/Counter} key.
The standby display appears.
Deleting a Special Sender
Use this function to program “Initial
Set Up” of a Special Sender.
A Press the {User Tools/Counter} key.
B Select [Fax Features] using {U} or
{T}, and then press the {OK} key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
FAX
.t
FAX
.t
FAX
.t
ABZ
S.eps
FAX
.t
FAX
.t
To Next Page
Loading...
