Ricoh Aficio 1515 - Page 97

Using Key Operator Settings
87
7
I Select the item you want to pro-
gram using {U} or {T}, and then
press the {OK} key.
Note
 You must select only the item
you want to program.
 To cancel these settings, press
the {Cancel} key. The display re-
turns to that of step
E
.
Authorized RX (Authorized
Reception)
A Select [Authorized RX] using {U}
or {T}, and then press the {OK}
key.
B Select [On] or [Off], using {U} or
{T}, and then press the {OK}
key.
Note
 After you perform step
J
, set
"Authorized Reception" of
“Reception Settings” to "On".
See p.67 “Reception Set-
tings”.
Forwarding
A Select [Forwarding] using {U} or
{T}, and then press the {OK}
key.
B Select [On] or [Off], using {U} or
{T}, and then press the {OK}
key.
If you select [Off], proceed to
step
J
.
Note
 Selecting [Same as Basic Set-
tings] will result in the same
setting made for “Forward-
ing” under “Key Operator
Tools”. See p.72 “Forward-
ing”.
C Specify an End Receiver.
Use the Quick Dial key or the
{Search Destination} key to spec-
ify an End Receiver.
***
FAX
717
.t
if***
FAX
717
.t
if
***
FAX
719
.t
if***
FAX
717
.t
if
***
FAX
720
.t
if***
***
FAX
721
.t
if***