Ricoh Aficio 1515 - Changing the Home Position

Using Key Operator Settings
83
7
Changing the Home Position
Note
 For details about setting parame-
ters, see p.76 “User Parameters”.
Follow the procedure below to set the
home position parameters.
Important
 Do not change any bit switches
other than those shown in the
above table.
A Press the {User Tools/Counter} key.
B Select [Fax Features] using {U} or
{T}, and then press the {OK} key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Parameter Setting] using {U}
or {T}, and then press the {OK}
key.
E Select [Home Position] using {U} or
{T}, and then press the {OK} key.
F Select the switch number you
want to change using the scroll
keys, and then press the {OK} key.
G Select the bit number you want to
change.
When you press the bit number,
the value switches between 1 and
0.
Note
 Repeat from step
G
to change
another bit number for the same
switch.
H Press the {OK} key.
To cancel these settings, press the
{Cancel} key. The display returns
to that of step
F
.
I Repeat steps
F
to
H
to change the
switch settings.
J When all the settings are made,
press the {User Tools/Counter} key.
The standby display appears.
ABZ
118
S.eps
FAX
659
.t
if
FAX
660
.t
if
FAX
706
.t
if
FAX
708
.t
if
***
FAX
712
.t
if***
***
FAX
713
.t
if***