Ricoh Aficio 1515 - Using Key Operator Settings; Counters; Forwarding

Key Operator Setting
72
7
Using Key Operator Settings
Counters
This function allows you to check the
total number of pages transmitted
and received on the display.
• Transmissions:
Total number of transmitted pages
•Receptions:
Total number of received pages
A Press the {User Tools/Counter} key.
B Select [Fax Features] using {U} or
{T}, and then press the {OK} key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Communication Page Count]
using {U} or {T}, and then press
the {OK} key.
E After checking the display, press
the {User Tools/Counter} key.
The standby display appears.
Forwarding
This function allows you to have mes-
sages printed on the machine, and
sent to a specified End Receiver.
This is useful if, for example, you are
visiting another office and would like
a copy of your messages to be sent to
that office.
Preparation
To use this function, set Forward-
ing under Reception Settings to On
(enable). See p.67 “Reception Set-
tings”
Limitation
 The Forwarding function does not
forward messages received with
Memory Lock.
 You can select end receivers only
from among destinations pro-
grammed in the Address Book.
ABZ
118
S.eps
FAX
659
.t
if
FAX
660
.t
if
***
FAX
703
.t
if***
***
FAX
704
.t
if***