Communication Information
18
2
D Enter a 4-digit Memory Lock ID
using the number keys, and then
press the {Start} key.
The display returns to that of step
C.
Note
If the Memory Lock ID does not
match, the message "
Specified
code does not match the
programmed Memory Lock ID.
" appears, and then the display
returns to that of step D .
To cancel printing after pressing
the {Start} key, press the
{Clear/Stop} key. The display re-
turns to that of step C.
E Press the {Cancel} key.
The standby display appears.
FAX
.t