2. In the [Language] list, select the language.
3. Click [Download].
4. Download Help by following the instructions on the screen.
5. Store the downloaded compressed file in a given location, and then decompress the file.
To create a link for the Help button ( ), save the downloaded Help files on a Web server.
Linking the URL of the downloaded Help
You can link the URL of the help file on a computer or Web server to the “?” button.
1. Log on to Web Image Monitor in the administrator mode.
2. In the menu area, click [Configuration].
3. Click [Webpage].
4. In the [Set Help URL Target] box, enter the URL of the help file.
If you saved the help file to "C:\HELP\EN", enter “file://C:/HELP/”. For example, if you saved the
file to a Web server, and the URL of the index file is “http:// a.b.c.d/HELP/EN/index.html”, enter
“http://a.b.c.d/HELP/”.
5. Click [OK].
• If you save the Help files on your hard disk, you must access them directly - you cannot link to them
using the Help button ( ).
4. Monitoring and Configuring the Printer
130
To Next Page
Loading...
