Ricoh Aficio MP 201SPF - Changing the LDAP Server

• p.341 "Registering SMTP and LDAP Authentication"
Changing the LDAP server
This section describes how to change the programmed LDAP server.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
4. Select [Prog/Chnge/Del LDAP Server] using [ ] or [ ], and then press the [OK] key.
5. Select [Program/Change] using [ ] or [ ], and then press the [OK] key.
6. Select the LDAP server you want to program or change using [ ] or [ ], and then press the
[OK] key.
Programming the LDAP server
53
1