• Under Windows 2000/XP and Windows Server 2003/2003 R2/2008, clear the [Form feed] check
box on the [NetWare Settings] tab in the printer properties dialog box.
Banner page
You should not configure a banner page on NetWare. If you want to change the banner page setting,
always configure it using Windows.
• Under Windows 2000/XP and Windows Server 2003/2003 R2/2008, clear the [Enable banner]
check box on the [NetWare Settings] tab in the printer properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the connection from the print server will be cut off for about 30-40 seconds
before re-connecting. Depending on the NetWare specification, print jobs may be accepted, but they will
not be printed during this interval.
When using the machine as a remote printer, wait about two minutes after resetting before attempting to
print.
Precautions
371
To Next Page
Loading...
