Accessing User Tools
This section describes how to access User Tools menu.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you have
finished.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Clear Modes] key is pressed.
Changing Default Settings
This section describes how to change the settings of User Tools.
• If Administrator Authentication Management is specified, contact your administrator.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using the [ ] or [ ], and then press the [OK] key.
3. Change settings by following instructions on the display, and then press the [OK] key.
• Press the [Escape] key to return to the previous display.
• To cancel changes made to settings and return to the initial display, press the [User Tools/Counter]
key.
• For details about specifying System Settings, see "System Settings".
• p.21 "System Settings"
18
To Next Page
Loading...
