Public URL display
msh> upnp url
Public URL configuration
msh> upnp url “string”
• Enter the URL string in the character string.
web
Use the “web” command to display and configure parameters on Web Image Monitor.
View settings
msh> web
URL configuration
You can set URLs linked by clicking [URL] on Web Image Monitor.
msh> web “ID” url http:// “The URL or IP address you want to register”/
• Specify “1” or “2” for ID as the number corresponding to the URL. Up to two URLs can be
registered and specified.
Resetting URLs registered as link destinations
msh> web “ID” clear url
• Specify “1” or “2” for ID as the corresponding number to the URL.
Link name configuration
You can enter the name for URL that appears on Web Image Monitor.
msh> web “ID” name “Name you want to display”
• Specify “1” or “2” for ID the corresponding number to the link name.
Resetting URL names registered as link destinations
msh> web “ID” clear name
• Specify “1” or “2” for ID as the number corresponding to the link name.
Help URL Configuration
You can set URLs linked by clicking “?” on Web Image Monitor.
msh> web help http://“Help URL or IP address”/help/
Resetting Help URL
msh> web clear help
4. Monitoring and Configuring the Printer
188
To Next Page
Loading...
