8. Press [Details].
9. Select [Register Group to] using [ ] or [ ], and then press the [OK] key.
10. Select the group name to which you want to register using [ ] or [ ], and then press the
[OK] key.
11. Press [End].
12. Press the [OK] key.
13. Press the [User Tools/Counter] key.
Displaying Names Registered in a Group
This section describes how to display names registered in a group.
You can check the names or groups registered in each group.
1. Press the [User Tools/Counter] key.
5. Registering Addresses and Users for Facsimile/Scanner Functions
324
To Next Page
Loading...
