7. Change the settings as necessary.
8. Press the [OK] key after changing each item.
9. Press [Exit].
10. Press the [User Tools/Counter] key.
Deleting the LDAP server
This section describes how to delete the programmed LDAP server.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
4. Select [Prog/Chnge/Del LDAP Server] using [ ] or [ ], and then press the [OK] key.
5. Select [Delete] using [ ] or [ ], and then press the [OK] key.
1. System Settings
54
To Next Page
Loading...
