14. Press the [Escape] key.
15. Press [End].
16. Press the [OK] key.
17. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Name".
• p.230 "Registering Names"
Deleting a User Code
This section describes how to delete a user code.
• After clearing the user code, the counter is automatically cleared.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
Authentication Information
241
To Next Page
Loading...
