27. Press [Exit].
28. Select [Search Options] using [ ] or [ ], and then press the [OK] key.
29. Enter attribute, and then press the [OK] key.
To search the LDAP server date using a keyword other than prepared keywords such as Name, E-
mail Address, FAX Number, Company Name, and Department Name, specify the attribute for the
keyword registered in your LDAP server, and the name to be displayed on the control panel during
the search. For example, to search e-mail address by “Employee No” in the key display field.
The attribute value may change depending on the server environment. Check the attribute complies
with your server environment before setting it.
30. Enter the Key Display, and then press the [OK] key.
The registered "Key Display" appears as a keyword for searching LDAP.
31. Press [Exit].
32. Press the [User Tools/Counter] key.
1. System Settings
52
To Next Page
Loading...
