10. Select [Register as] using [ ] or [ ], and then press the [OK] key.
11. Select [Destination Only], [Sender Only] or [Dest. & Sender] using [ ] or [ ], and then press
the [OK] key.
12. Select [Dest.Protect Obj.] using [ ] or [ ], and then press the [OK] key.
13. Select [Folder] or [Sender] using [ ] or [ ], and then press the [OK] key.
If you select [Destination Only] in [Register as], only [Folder] can be selected.
If you select [Sender Only] in [Register as], only [Sender] can be selected.
14. Select [Protect] or [Do not protect] using [ ] or [ ], and then press the [OK] key.
[Protect] or [Do not protect] can be selected for both [Folder] and [Sender] at the same time.
15. Press the [Escape] key.
5. Registering Addresses and Users for Facsimile/Scanner Functions
336
To Next Page
Loading...
